The Bellypack Transmitter - Lite (BPT-L) has two indicator lights:
- Red LED to the left of the green button
- Green LED to the right of the green button
These lights provide status information on the device.
| Green LED behaviour | Description |
|---|---|
| Off | Device is powered off. |
| On (bright) or flashing (bright) | Device is operating normally with a radio link to the receiver. |
| Slowly blinking (dim) | No radio link to the receiver. This can happen if the machine isn't on, the machine is out of range, or the remote wasn't matched with the receiver. |
| Quickly blinking (dim) |
There's a radio signal from the receiver but there's an incorrect mode or incorrect matching. This can happen if the receiver is being configured with another remote or is in matching mode, or the remote wasn't matched with the receiver. |
| Pulsing (brighter and dimmer) | The unit is charging. |
| Red LED behaviour | Description |
|---|---|
| Off while green light is on or flashing/blinking | Primary functions are active. Press the green button to shift to secondary functions. |
| Flashing while green light is on or flashing/blinking | Battery charge is getting low. This happens during normal operation while the primary functions are active. You can connect a charger and continue to work. |
| On (bright) while green light is on or flashing/blinking | Secondary functions are active. |
| On (bright) while green light is off | You've pressed the red button and the device is shutting down. |
| Pulsing (brighter and dimmer) | A charger is connected but can't charge the battery. |